How to installation of led neon signs?

February 10, 2023
Latest company news about How to installation of led neon signs?

How Are Neon Signs Installed?

We explain how simple it can be to install Vasten LED Neon signs

Which one did your sign come with?

Installation is definitely easier with a buddy, and a power drill too.

 

 

Mini Screws Stand-off Screws Suspension Wires

 

Our sign install as hanging a painting - a painting that plugs in and glows! You won’t need an electrician for this one.

 

What installation options do I have?

When buying any custom neon signs from us you will receive one of the 3 display options listed here, the Mini Screws, the Stand-off screws or the Suspension wires - if you didn’t specify how you’d install or use the sign you would have received the mini or stand-off screws.

How to install your LED Neon sign using our Mini Screws.

Step 1:

Take your neon sign only and place it flat up against the intended wall or space (if it’s super long or heavy please ask a friend for assistance).

 

Step 2:

While one person is holding the sign, use a marker pen to dot the pre-drilled holes in the wall where the screws will be going - this will be super helpful when you get the drill out next.

latest company news about How to installation of led neon signs?  0

 

Step 3:

Place the sign back in the box or on a safe surface to avoid scratching the acrylic backing - get your drill equipped with a smaller twist drill bit than the diameter of the screws, and drill pilot holes exactly on the points you marked on the wall using your marker in step 2.

 

 

Step 4:

Next put the sign back up on the wall, and hold it in place making sure your drilled holes and the holes in the acrylic backing match. Then take the black (or gold/silver) rubber washer and place it directly over your first hole. Then place the small silver screw through the holes. Grab your drill and drill the small screw through the acrylic hole into the pilot hole to secure it.

 

Step 5:

Repeat step 4 until all screws are in place. Finally place the small silver end caps on top of the black rubber washers to complete the look.

 

Final Step:

You’re all done! Now plug the sign into the transformer (black or white box), and then into the wall outlet and it should illuminate no problem.

latest company news about How to installation of led neon signs?  1

How to install your LED Neon sign using our Stand-off screws.

 

 This is how your stand-off screws should look once fully installed.

The mounting screws are great for surface installations like walls for example - this is our most commonly selected installation method.

latest company news about How to installation of led neon signs?  2

Step 1:

Take your sign only and place it flat up against the intended wall or space (if it’s super long or heavy please ask a friend for assistance).

Step 2:

While one person is holding the sign, use a marker pen to dot holes in the wall where the mounting holes have been drilled in the acrylic backing - this will be super helpful when you get the drill out next.

Step 3:

Place the sign back in the box or on a safe surface to avoid scratching the acrylic backing - get your drill equipped with a twist drill bit and drill pilot holes exactly on the points you marked out in step 2.

Step 4:

Pick up the mounting pin and unscrew it. Take the hollow base of the mounting pin and place it up against the previously drilled pilot hole, place the smaller silver securing screw through the hollow entry. Now with a new screwdriver drill bit, screw the small silver securing screw directly through the hollow base and into the wall securing the hollow base to the wall. Repeat this until all hollow bases are secured on the wall.

Step 5:

Now get your sign and place it up against these bases and hopefully you’ve lined them up correctly. Then simply grab the remaining wider screw and screw into each base securing the sign to the wall - make sure they’re tight!

Final Step:

You’re all done! Now plug the sign into the transformer (black/white box), and then into the wall outlet and it should illuminate no problem.

latest company news about How to installation of led neon signs?  3