Colorful Housing Mini Size LED Neon Flex Rope Light 12V Input waterproof Home Decor

Specification:

Product Model:	TA-CS-R2835R-24V	TA-CS-R2835R-12V
LED Type:	SMD2835	SMD2835
Material:	Eco PVC	Eco PVC
Working Voltage:	24V DC	12V DC
Power Consumption:	8W/M	8W/M
LED QTY per meter:	108pcs	108pcs
Avaliable color	Red, Green, Blue, Orange, Yellow, White, Pink
Min. Cutting Unit:	6LEDs	3 LEDs
Min. Cutting Length:	2.18''/5.54cm	1.09''/2.77cm
Max Length:	65.62'/20m	32.8'/10m
Protection Rating:	IP65	IP65
Min. Bending:	Dia 4cm	Dia 4cm
Bending Direction:	Horizontally	Horizontally
Ambient Temp.:	-30℃ to +45℃	-30℃ to +45℃

xtra-Thin LED Neon Flex — 6 Core Advantages Explained

1. Adopt 108pcs High-Brightness SMD2835 LEDs/m

• 108 LEDs/m high density​ eliminates visible LED hotspots even at close inspection — critical for fine brand logos and narrow trim runs
• SMD2835 packages (2.8×3.5mm)​ are 30% smaller than SMD5050, allowing higher density in the slim 5mm/8mm profile without crowding the FPCB
• 105–120 lm/W efficacy: 8W/m power draw delivers high-lumen output with up to 90% energy savings​ vs. 3kV–15kV traditional glass neon
• Strict color consistency​ (SDCM <3 for white variants) for comfortable retail/hospitality glow; RGB variants use 1R1G1B per 2835 package for clean color mixing without fringing
• 12V/24V DC low-voltage drive​ — safe to touch, no high-voltage certifications required
• Selected 220V AC models feature 120 LEDs/m for large-scale architectural runs up to 100m

2. LED and Components Double Protected — No Unit Failure

• Circuit-level redundancy: Every 3 LEDs (12V) or 6 LEDs (24V) form an independent parallel branch. If a single LED fails, its branch continues operating — failure does not cascade
• Component-level sealing: Every SMD solder joint is secondary-coated with clear silicone before PVC jacketing, preventing moisture ingress and oxidation even if the outer jacket is nicked
• Pure copper FPCB: Minimizes voltage drop on long runs — 12V DC supports up to 10m, 24V DC up to 20m single-feed without "bright head / dim tail" effect
• Result: Zero "unit failure" cascade — critical for commercial and architectural installs where downtime is unacceptable

3. First-Class Eco-Friendly UV-Resistant PVC Material

• Eco-friendly & non-toxic: RoHS-compliant, zero lead, mercury, or hazardous substances — safe for indoor public spaces (homes, schools, hospitals, retail) and outdoor environments
• UV stabilization: Imported UV stabilizer additives resist photodegradation, maintaining optical clarity and flexibility over time
• Milky-white diffuser jacket: Semi-transparent eco-PVC scatters direct LED emission into continuous, dot-free glow
• Operating temperature: -30°C to +45°C — performs reliably in northern winters and hot-climate summers
• Upgrade note: For full outdoor exposure (direct rain, coastal salt spray, 3–5+ years UV), we recommend our silicone co-extruded IP67 series

4. Extra Thin, Lightweight, Soft Bend — High Brightness, Uniform Light, No LED Dot or Dark Spot

• Ultra-slim profile: 5×12mm / 8×16mm cross-section (30–40% thinner than standard 12×22mm flex), weighing only 0.18–0.22 kg/m — 60% lighter than glass neon​
• 20mm minimum bend radius: Follows curved building outlines, round signage, column wraps, and irregular landscape features without kinking FPCB or jacket
• Dome surface with inner micro-diffuser: The semi-circular PVC profile scatters direct LED light into a 120° continuous, linear glow​ — no visible LED dots even close-up, no dark spots between cut points or LED clusters
• Even for fine brand typography: Perfect for café "OPEN" scripts, convenience store logo outlines, and intricate brand marks where dot-free uniformity is non-negotiable
• Consistent color across 10+ locations: RGB variants deliver clean, even color blends with no "halo" fringing — ideal for franchise and chain-store brand consistency

5. Easy to Install — Cuttable & Reconnectable

• Marked cut points: Black cut lines every 2.77cm (12V) or 5cm (24V) along the strip — cut only at these points to avoid damaging parallel circuits
• Reconnect accessories available: Matching nylon waterproof connectors, splice pins, and end caps enable cut/reseal operations while retaining full IP65 rating
• Tool-light setup:
  • Indoor: Pre-applied 3M VHB double-sided tape on FPCB backside for peel-and-stick installation (furniture edges, cabinet undersides, bedroom décor)
  • Outdoor: Compatible with standard narrow aluminum extrusion channels (sold separately) for added protection and heatsinking
• Horizontal bending only: Minimum 4cm bend diameter — follows arched windows, bridge parapets, and irregular shapes without kinking
• Lightweight handling: At 0.18–0.22 kg/m, it mounts with simple clips — no heavy support frames needed

6. Protection Rating IP65 — With Critical Seal Requirement

• IP65 certification: Dust-tight, and resistant to low-pressure water jets (light rain, sprinkler overspray, outdoor humidity) — suitable for covered patios, building outlines, sign boxes, walkway edges, and narrow storefront borders
• Not submersible​ — for immersion use, upgrade to our IP67 silicone series
• ⚠️ Mandatory install step: All cut points, connector joints, and strip terminations MUST be sealed with the provided silicone glue during installation​ to maintain IP65 rating. This step is critical: unsealed joints are the #1 cause of field failure in "waterproof" neon flex.
• Second layer of defense: The double-coated solder joints and sealed FPCB provide backup moisture protection even if the outer jacket is slightly damaged.

Technical Specifications (Typical Values)

Applications

• Outlining buildings, awnings, and ceilings
• Narrow storefront borders and sign boxes
• Archway, canopy, and bridge edge lighting
• Column wraps and feature wall accents

• Bedroom, kitchen, dining, and bathroom accent lighting
• TV backlight & cabinet lighting
• Garden, deck, and walkway lighting
• DIY household projects — hallways, stairs, windows

• Bar counters, club backlighting, and bottle displays
• Restaurant and retail accent lighting
• Display cases and museum-quality illumination (no UV damage)
• Hotel corridors and lobby feature installations

• Signage letters backlighting — illuminate 3D channel letters with even, shadow-free glow
• Wedding & party backdrops (safe, low-voltage, shatterproof)
• Festival and performance installations
• Handmade neon signs, DIY neon art

Why Vasten

• Manufacturer since 2011: 5,000+㎡ dust-free workshop, automated SMT production lines, 100+ professionals including 20 engineers and 30 QC experts
• Proven project pedigree: Trusted by Disneyland, Happy Valley, and a British royal wedding
• Strict QC pipeline: 100% LED incoming inspection, mandatory burn-in testing, 2-year warranty
• Supply ability: 3,000 meters/month per SKU; 3–5 day lead time for standard orders
• Global certifications: CE & RoHS compliant for worldwide customs clearance

Features compared with traditional class neon lights:
-Super Brightness
-60000 hour life
-More durable and flexible
-Minimum bending radius: 4cm
-Flexible cut length, easy for making up different characters, patterns and forms
-High safety
-Easy for transportation and installation

Applications & Installations:

* Bedroom Light
* Garden Light
* Dining light
* Accent Light
* Bar Light
* Club
* counter Light
* office